9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-2398007.png)
24. Remove the steering gear through the wheel housing on the passenger side, angling it to the front so that it clears surrounding components. Collect
the valve body's dust cover.
IMPORTANT: Take care to avoid damaging the gaiters.
To Fit
1. Turn the steering gear's pinion shaft until the rack is in the center position and lift the steering gear into place through the wheel housing on the
passenger side. Make sure that the steering gear does not catch on hoses and cables in the engine bay.
IMPORTANT: Take care to avoid damaging the gaiters.
Fit the dust cover on the valve body.
2. Connect the delivery and return pipes to the valve body, fitting new sealing rings. Do not tighten the bolts.
3. Fit the steering gear's bolts in place, complete with washers and nuts, but do not tighten them. On LHD cars a bracket for the delivery pipe replaces
