9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Control Arm Bushing: Service and Repair
Rear Suspension
Bush, Support Arm
Bush, Support Arm
To Remove
1. Raise the car and remove the rear wheel on the side in question.
2. Unhook the exhaust system's rear and center rubber hangers. Hang up the exhaust system so that it does not put too much of a strain on the front
rubber hangers and flexible section.
3. Unbolt the lower transverse link from the longitudinal link.
4. Unbolt the upper transverse link from the longitudinal link.
5. Unbolt the anti-roll bar from the longitudinal link.