9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
1. Lubricate the bearing with Gleitmo 750, part no. 30 07 309.
2. Insert the gear lever in the ball socket.
3. Hook the spring onto the ball socket ring. Insert the ring in the ball socket and make sure that the spring is under the ring's lugs. Then tension and
secure the spring in the hook on the ball socket.
4. Fit the gear lever in the gearcase.
Gear Lever Removal And Installation
Gear Lever
To Remove
1. Remove the gear lever housing as described in.
2. Remove the lock plate holder.
3. Remove the spring securing the lock plate.
4. Use a screwdriver to disengage the pawl which is controlled from the ignition switch. Lift up the lock plate together with its plastic bracket.