9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
8. Rotate the disc and read the gauges. Note the runout (A) and variation in thickness (B).
9. Remove the dial gauges, brake disc measuring tool and wheel studs with washers.
10. If runout and thickness variation exceeds specified tolerances, the discs must be machined as described in Turning brake disc, fitted or Turning
brake disc, removed, or changed as described in Brake disc, front wheel.
11. Fit the brake caliper, apply Loctite 242 to the stud threads and tighten the studs, using a torque wrench.
Tightening torque 117 Nm (81 ft. lbs.)
12. Fit the wheels.
Tightening torque 110 Nm (81 ft. lbs.).
Important: The wheel must hang freely when the wheel bolts are being tightened.
13. Repeat this method of measurement on the other front wheel.
14. When the measurements have been completed, lower the car and depress the brake pedal to press out the brake pads.