9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
2. ESP unit: Plug in the connector for the pressure sensor.
3. Remove the plugs and fit the brake pipes. Tighten the brake pipe unions by hand first and then with a spanner.
Note: Start with the rear brake pipes and tighten one union before starting with the next.
Tightening torque 16 Nm (12 ft. lbs.)
4. LHD, manual gearbox: Attach the clutch fluid hose to the brake fluid reservoir. Fit the hose clip upwards.
5. Plug in the connector.