saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Starting and Charging > < Yaw Rate Sensor|Specifications|Page 6057
Page 2
background image

2. Fit the gyro sensor to the bracket. Use a large screwdriver to pry aside the air duct slightly to access the left-hand screw.

Important: Fit the gyro sensor with the connector and arrow pointing forward in the car.

Tightening torque 5 Nm (3.5 ft. lbs.)

3. Manual gearbox: Fit the gear lever housing.

Automatic transmission: Fit the selector lever housing.

4. Fit the center console

Starting and Charging > < Yaw Rate Sensor|Specifications|Page 6057