9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
/l4-2.3l_turbo_(b235)/Page-1952012.png)
The climate system has three air-mixing flaps, one for the driver's zone and one for the front seat passenger that is linked to the air-mixing flap for the
rear seat passengers.
The stepping motor for the left-hand air-mixing flap is supplied with current from pins 25 and 6 (winding 1) and pins 26 and 7 (winding 2) on the ACC
unit.
The flap position is set by the control module using the mixed-air temperature sensor for the left-hand side so that the requested mixed-air temperature is
achieved.
When OFF, the flap is set to maximum cold.
Diagnostics
In the event of an open circuit or short circuit, diagnostic trouble code B2490 is generated and 06 is displayed instead of right-hand temperature when
calibrating.
If the motor jams, diagnostic trouble code B2496 is generated and 07 is displayed instead of right-hand temperature when calibrating.
If the motor does not have a mechanical contact with the flap, diagnostic trouble code B2495 is set and 08 is displayed instead of right-hand temperature
while calibrating.
Diagnostics tool shows 100% at maximum heat and 0% at maximum cold.
Stepping Motor, Air-Mixing Flap, RH
Stepping Motor, Air-mixing Flap, RH