9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
10. Fit the heat shield to the manifold.
11. Fit the inlet hose and mass air flow sensor.
12. Evacuate the A/C system and fill with R134a refrigerant.
Compressor Low-Pressure Pipe
Compressor Low-pressure Pipe (4-cyl)
The compressor's low-pressure pipe runs from the expansion valve via a joint to the compressor.
IMPORTANT: Be careful not to contaminate the expansion valve.
To remove
1. Place the car on a lift.
2. Remove the right headlamp, direction indicator and grille.
3. Drain the refrigerant from the A/C system.
4. Detach the inlet hose with mass air flow sensor without unplugging the contact and place it to one side.