9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
IMPORTANT: If the desiccant container has been open for more than 15 minutes in total, it should be changed.
11. Loosen the pipe from the holders on the subframe and remove it.
NOTE: Make a note of how the pipe is positioned before removing it.
12. Loosen and push aside the power-steering oil container.
13. Detach the rear end of the high-pressure pipe from the expansion valve.
Plug the openings.
14. Loosen the high-pressure pipe from the holders on the structure.
15. Carefully lift out the high-pressure pipe.
To fit
1. Position the rear end of the high-pressure pipe.
2. Remove the plugs. Replace and lubricate the O-rings of the high-pressure pipe.
3. Connect the high-pressure pipe to the expansion valve.
Tightening torque: 8 Nm (5.9 lbf ft)