9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
21.
Fit the heating and ventilation unit, as described in WIS 9-5 M98 - 8. Body - Heating and ventilation, A/C - Adjustment/Replacement - Climate
control unit.
22.
Replace and lubricate the 0-rings on the pipes to the compressor and the condenser using synthetic vaseline, part no. 30 15 286. Exercise care that
the 0-rings are not damaged.
23.
In the event that sound insulation shall be fitted:
Note
Sound insulation will not have the same fit as before, this will not affect sound insulation.
Method B
To remove, method B
1.
Turn the ignition switch to the ON position.
2.
Engage distribution mode VENT. Wait until the system has stabilized, (approx. 30 seconds).
3.
Turn the ignition key to the OFF position.
4.
Remove the heating and ventilation unit from the car, as described in WIS 9-5 M02-8. Body - Heating and ventilation, A/C -
Adjustment/Replacement - Climate control unit.
5.
Remove the foam seal from around the fan unit.