9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
10. Detach the high-pressure pipe from the compressor and place it to one side.
Plug the openings.
11. Detach the front end of the low-pressure pipe from the compressor.
Plug the openings.
12. Detach the low-pressure pipe from the joint block on the right-hand structure by the service nipple.
13. Remove the low-pressure pipe.
First, pull it down from the compressor under the car and then up.
NOTE: Make a note of how the pipe is positioned before removing it.
14. Loosen and push aside the power-steering oil container.