9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
Cars with automatic transmission:
Connect the oil cooler hose on the bottom of the fan cowling.
15. Fit the heat shield to the manifold.
16. Fit the by-pass pipe and valve.
17. Fit the inlet hose and mass air flow sensor.
18. Evacuate the A/C system and fill with R134a refrigerant.
19. Fit the right-hand headlamp and grille.
Evaporator High-Pressure Pipe
Evaporator High-pressure Pipe (4-cyl Petrol)
The evaporator's high-pressure pipe consists of two pipes running from the receiver via a joint by the console behind the right-hand headlamp to the
expansion valve.
IMPORTANT: Be careful not to contaminate the expansion valve.
To remove
1. Place the car on a lift.
2. Drain the refrigerant from the A/C system.
3. Detach the inlet hose with mass air flow sensor, without unplugging the connector, and place it on one side.