saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear-Seat Belts, 4D|Page 8298 > < Rear-Seat Belts, 4D|Page 8296
Page 4
background image

9

Fit the screws securing the top of the side trim, starting with the rear screw to be sure that the trim is properly located.

10

Fit the side bolster by hooking the bottom in place and then pressing home the upper locking tongue.
Raise the rear seat's backrest and seat cushion to their original positions.

11

Fit the parcel shelf support, clips, 3 screws and 1 cover.

12

Fit the D pillar trim, secured with clips. Press the rear headlining into place.
Adjust the weatherstrip over the edges of the D pillar trim and headlining.

Rear-Seat Belts, 4D|Page 8298 > < Rear-Seat Belts, 4D|Page 8296