9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
1
Fold down the backrest.
2
Remove the head restraints from the seat.
3
Remove the speaker grilles on both sides.
4
Remove the 3 clips at the front of the parcel shelf.
5
Lift out the parcel shelf trim and pull out the center belt.
6
Unscrew the lower belt mounting, 1 nut.
7
Remove the center belt from the parcel shelf, 1 nut.
To fit
IMPORTANT
Ensure that the belt runs correctly.
Fit in reverse order.
Check that the center belt runs in front of the locating pin and backrest.
Tightening torques:
Inertia reel mounting nuts 45 Nm (33 lbf ft).
Floor mounting 45 Nm (33 lbf ft)
Rear-Seat center Belt, 5D
To remove
1
Tip the rear-seat seat cushions forward.
2
Fasten the rear belts in the belt holders on the C pillars.
3
Tip the 40% backrest forward slightly and detach the clip securing the trim.
4
Use a screwdriver to release the catch by the sill and lift out the backrest (upwards).
5
Pull the backrest away from the hinge pin at the center pivot and lift out the backrest.