9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
Yaw Rate Sensor: Service and Repair
Yaw rate sensor
To remove
1. Remove the center console.
2. Manual gearbox: Remove the gear lever housing.
Automatic transmission: Remove the selector lever housing.
3. Remove the gyro sensor. Use a large screwdriver to pry aside the air duct slightly to access the left-hand screw.
4. Unplug the connector from the gyro sensor.
Note: The connector has a locking device that must be released.
To fit
1. Plug in the gyro sensor.