saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6748 > < A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6746
Page 46
background image

Note

If idling speed has been increased, inform the customer that the car will pull with more force when it is stationary and the selector lever is in
position D.

NO: Continue following step 5 of these instructions.

5.

Raise the car.

6.

Check that the rear and centre bushes are correctly fitted. They must be fitted with one opening to the front and one opening to the rear.

7.

Are the bushes correctly fitted in the subframe?

NO: Replace the bush following "WIS - 7. Suspension, wheels - Suspension, front - Adjust, replace - Bush, subframe". At the same time, check
and if necessary replace the two front bushes. Then continue following step 8 of these instructions.

YES: Continue following step 8 of these instructions.

A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6748 > < A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6746