saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Side Rear Window|Page 12050 > < Side Rear Window|Page 12048
Page 6
background image

13. If necessary, secure the window with tape or straps so that it is held against the edge of the roof.
14. Place a counterstay (a piece of cardboard about 1 mm thick, for instance) at the bottom rear corner to prevent the glass from sliding down against

the edge of the sheet metal.

15. Reset the glue gun.
16. Allow the adhesive to harden before continuing. Betamate E 2400 hardens in 2 hours at 23 °C and 50 % relative humidity.
17. Plug in the antenna connector and fit the C-pillar trim.

Side Rear Window|Page 12050 > < Side Rear Window|Page 12048