9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
23. Place the sensor in its console on the windscreen. Fit the clamps by pressing the sensor against the windscreen while fastening one corner at a time.
Replace any defective clamps.
NOTE: Check that the clamps sit correctly in their grooves and that the sensor has good contact with the windscreen.
24. Position the lower edge of the rain sensor cover. Press the cover home onto the windscreen console.
25. Check the windscreen washers, and the function and park position of the wipers.
If fitted, check the function of the rain sensor.
26. Remove the tape and clean the windscreen both inside and out.