9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
/v6-3.0l_turbo_(b308)/Page-2493004.png)
5. Tip the rear seat cushion forward and unscrew the lower seat-belt anchorage.
6. Remove the strap guide from the C pillar trim.
7. Pull the belt out through the C pillar trim.
To fit
IMPORTANT
The belt must be fitted so that it will run properly when assembly is completed.
1. Draw the belt through the C-pillar trim.
2. Fit the lower seat-belt anchorage, making sure that the guide is in the right place so that the seat cushion's hook will assume the correct position
