9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
/v6-3.0l_turbo_(b308)/Page-2532006.png)
When the ignition is ON, +15 current is fed from fuse 26 to relay 113. The ACC control module outputs a message on the bus to the DICE control
module 628 when it requests activation (automatically or when the switch on the ACC panel is pressed). DICE then grounds the coil in relay 113 via pin
52. +30 current is then fed from fuse 24 via the relay contacts and the antenna amplifier 624 to the electrically heated rear window 115, which is
grounded through the antenna filter 644.
Current is supplied at the same time to the heating elements in door mirrors 207D/P via fuse 18 and relay 113. The left-hand door mirror is grounded at
grounding point G33 and the right-hand one at grounding point G24.
When the relay has been activated, DICE outputs a message on the bus to ACC which turns on the indicator light on its display.
Electric heating uses the following information
