9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
5. Position the seat and insert the screws in the front without tightening them.
6. Fit the screws in the back of the seat cushion, 2 screws.
7. Tighten the screws in the front of the seat cushion.
8. Refit the plastic cover on each side of the backrest joint.
9. Plug in the connector and fit new cable ties.
10. Fasten the straps on the bottom of the backrest upholstery under the seat cushion.