9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
Engine Mount: Service and Repair
Engine Mounting Rear
Engine Mounting, Rear
To remove
Important:
^
The oxygen sensor cable must not be of twisted type. Twisted cables exposed to vibration can break.
^
The oxygen sensor is sensitive to impacts and jolting and must be handled with care.
1. Drape wing protectors over the wings and remove the engine cover.
2. Remove the front exhaust manifold's heat shield.
3. Unbolt the front pipe from the turbo.
4. Unplug the oxygen sensor's connector.