9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
/v6-3.0l_turbo_(b308)/Page-729013.png)
Tightening torque: 8 Nm (5.9 ft. lbs.)
20. Fit the turbo's intake pipe.
Tightening torque:
V-clamp 3 Nm (2.2 ft. lbs.)
U-clamp cylinder head 14 Nm (10.3 ft. lbs.)
21. Fit the hose to the mass air flow sensor
22. Fit the crankcase ventilation pipe between the cylinder head and the turbo inlet pipe. Connect the hose from the oil trap.
23. Fit the SAI pipe with valve and new gaskets to the bracket and the hose connection to the front SAI valve. Check the connection.
24. Lower the turbo delivery pipe and connect it to the throttle body.
25. Raise the car and remove the plug in the charge air cooler outlet.
26. Connect and tighten the turbocharger delivery pipe hose clip to the charge air cooler.
27. Lower the car and tighten the turbocharger delivery pipe hose clip to the throttle body.
