9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
/v6-3.0l_turbo_(b308)/Page-1069002.png)
5. Remove the upper intake manifold. Plug the passageways to prevent dirt from entering.
6. Detach the wires from the fuel rail.
7. Detach the fuel connections. Keep an absorbent cloth or paper nearby to take care of any fuel spills.
8. Detach the vacuum hose to the fuel pressure regulator.
9. Blow clean around the injectors with compressed air and remove the fuel rail and injectors.
IMPORTANT:
Secure each injector clip with a narrow cable tie. Make sure that it is correctly fitted and then tighten it. If this is not done, the injectors could come loose
from the fuel rail during the flow test.
