9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
8. Tighten the steering gear retaining bolts.
Tightening torque 95 Nm (70 ft. lbs.)
9. Position the engine cushion and thread the bolts.
10. Raise the subframe and thread the bolts in the centre mountings.
11. Thread the bolts for the rear subframe mountings and the reinforcements.
12. Thread the bolts for the reinforcements by the rear subframe mounting.
13. Tighten the centre mountings.
Tightening torque 100 Nm +45° (75 ft. lbs. +45°)
14. Tighten the rear subframe mountings and the reinforcements.
Tightening torque 100 Nm +45° (75 ft. lbs. +45°)
15. Tighten the reinforcement at the subframe's rear attachment point.
Tightening torque 65 Nm (50 ft. lbs.)