saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Throttle Cable/Linkage|Description and Operation|Page 6378 > < Throttle Cable/Linkage|Description and Operation|Page 6376
Page 1
background image

Throttle Cable/Linkage: Service and Repair

Throttle pedal cable/adjustment of throttle pedal cable, V6 
To remove

1. Open the data link connector cover.
2. Undo the screws in the data link connector.
3. Remove the screws and clip securing the lower panel with air duct.
4. Unplug the connector for the floor lighting.
5. Lift out the lower panel.

6. Disconnect the throttle cable from the throttle pedal by sliding back the bush and removing it and the cable.

Throttle Cable/Linkage|Description and Operation|Page 6378 > < Throttle Cable/Linkage|Description and Operation|Page 6376