saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Axle Shaft|Service and Repair|Page 7130 > < Axle Bearing|Service and Repair|Page 7125
Page 1
background image

Axle Shaft: Service and Repair

Intermediate Shaft, V6

To Remove

1. Lift off the battery cover.
2. Remove the negative lead from the battery.
3. Lay down wing protectors and remove the generator cooling bellows (snap fastening).

4. Relieve the belt tensioner with a 15 mm socket wrench in the centre and lift off the multigroove belt.
5. Remove the belt tensioner.
6. Undo the upper generator bolt.
7. Raise the car.
8. Remove the RH wheel.

Axle Shaft|Service and Repair|Page 7130 > < Axle Bearing|Service and Repair|Page 7125