9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-1922002.png)
1. Fit the sensor to the shaft and plug in the connector.
2. Fit the bracket for the cable entry. Tighten the bolts for the selector lever position sensor first (important). Then tighten the nut on the selector
lever position sensor and bend up the locking plate.
Tightening torque, bolts 25 Nm (18 ft. lbs.)
Tightening torque, nut 8 Nm (6 ft. lbs.)
3. Engage neutral, fit Adjustment tool, gear selector position sensor 87 92 467. Undo the selector lever position sensor bolts and adjust the sensor so
that the line is visible in the center of the slot in the adjustment tool. Tighten the bolts.
Tightening torque 25 Nm (18 ft. lbs.)
4. Remove the adjustment tool.
5. Clean and lubricate the fluid filler pipe's O-ring with petroleum jelly (Vaseline).
