9-7X L6-4.2L (2008)
2. Remove the latch release cables (1) from the latch release mechanism, located at the bottom of the seat back frame.
3. Remove the head restraint release cable (2) from the left hand hinge bracket.
4. Remove the bolts (2) that retain the latch bracket to the hinge bracket.
5. Remove the bolts (1) that retain the hinge bracket to the seat back frame.
6. Remove the hinge bracket from the seat back frame.
Installation Procedure
1. Position the hinge bracket to the seat back frame.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the hinge bracket to the seat back frame with 2 bolts (1).
Tighten the seat back hinge bolts to 35 Nm (26 ft. lbs.).
3. Install the latch bracket to the hinge bracket with 2 bolts (2).
Tighten the seat back hinge bolts to 35 Nm (26 ft. lbs.).
4. Install the latch release cables (1) to the latch release mechanism, located at the bottom of the seat back frame.
5. Install the head restraint release cable (2) the left hand hinge bracket.
6. Install the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (See: Rear Seat Back Cushion Cover and Pad
Replacement).
Front Seat Back Replacement
Front Seat Back Replacement
Removal Procedure
