9-7X L6-4.2L (2008)
![background image](/saab/9-7x/l6-4.2l/Page-2624011.png)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Install the screws securing the seat cushion trim panel to the seat cushion assembly.
Tighten the rear seat cushion trim panel screws to 2 Nm (18 in. lbs.).
2. Install the seat cover J-strips (1) to the seat cushion trim panel (2).
3. Install the 2 bolts (2) securing the support (1) to the seat cushion trim panel.
Tighten the rear seat support bolts to 35 Nm (26 ft. lbs.).
4. Install the rear seat bracket with the 4 mounting nuts (2).
Tighten the rear seat bracket mounting nuts to 25 Nm (18 ft. lbs.).
5. Install the rear seat bracket trim covers (1).
6. Install the seat in the vehicle. Refer to Rear Seat Replacement (See: Service and Repair/Rear Seat Replacement).
Rear Seat Number 1 Cushion Pull Strap Replacement
Rear Seat Number 1 Cushion Pull Strap Replacement
Removal Procedure
1. Remove the rear seat cushion assembly from the vehicle. Refer to Rear Seat Cushion Replacement (See: Rear Seat Cushion Replacement).