9-7X L6-4.2L (2008)
6. Install the NEW copper gaskets on the brake hose fitting.
7. Remove the plug from the brake hose end.
8. Install the brake hose fitting and fitting bolt to the rear brake caliper.
Tighten the bolt to 54 Nm (40 ft. lbs.).
9. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair/Hydraulic Brake
System Bleeding (Manual))Hydraulic Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair/Hydraulic Brake System
Bleeding (Pressure)).
10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
11. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).