saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 8718 > < Procedures|Page 8716
Page 2
background image

7. Remove the shield for the fuel tank. Refer to Fuel Tank Shield Replacement  (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel

Tank/Fuel Tank Shield/Service and Repair).

8. Remove the rear support bracket from the fuel tank.

Important:  When performing this service procedure, the fuel tank will only drop about 102 mm (4 inches) when supported by the pole
jack. It is not necessary to lower the fuel tank any further than that.

9. Lower the fuel tank to allow access to the rear park brake cable retainer above the fuel tank.

10. Remove the park brake cable nuts from the underbody mounting studs.

11. Remove the park brake cable from the park brake cable retainers, left rear shown.

12. Remove the park brake bracket bolt from the frame.

Procedures|Page 8718 > < Procedures|Page 8716