9-7X L6-4.2L (2008)
Parking Brake Lever: Service and Repair
Park Brake Lever Assembly Replacement
Removal Procedure
1. Remove the floor console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Console
Replacement).
2. Disable the park brake automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Parking Brake Cable/Service and
Repair/Procedures/Parking Brake Cable Adjuster Disabling).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Disconnect the park brake cables from the equalizer.
5. Lower the vehicle.
6. Disconnect the electrical connector from the park brake warning lamp switch.
7. Remove the remaining park brake lever retaining nut.
8. Remove the park brake lever assembly from the vehicle.
Installation Procedure