9-7X L6-4.2L (2008)
Valve Cover: Service and Repair
Camshaft Cover Replacement
Removal Procedure
1. Remove the intake manifold. Refer to Intake Manifold Replacement (See: Intake Manifold/Service and Repair).
2. Remove the A/C line at the oil level indicator tube bracket nut.
3. Remove the A/C bracket bolt from the engine lift hook.
4. Position the A/C line out of the way.
5. Remove the engine lift bracket.
6. Disconnect the ignition control module electrical connectors.
7. Loosen the ignition control module bolts.