9-7X L6-4.2L (2008)
Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice (See: Powertrain Management/Emission Control
Systems/Evaporative Emissions System/Service Precautions/Vehicle Damage Warnings/Fuel and Evaporative Emission Hose/Pipe Connection
Cleaning Notice).
7. Disconnect the fuel feed (1) and fuel return (2) pipes from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
8. Disconnect the integral clip (3) from the wire harness bracket.
9. Remove the engine wire harness bracket bolt.
10. Position the engine electrical wire harness bracket with wires attached out of the way.
11. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.