9-7X L6-4.2L (2008)
1. Install the air temperature actuator - left (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the air temperature actuator - left retaining screws.
Tighten the screws to 1.9 Nm (17 in. lbs.).
3. Connect the air temperature actuator - left electrical connector.
4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel Carrier Replacement).
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Actuator Recalibration (See: Testing
and Inspection/Programming and Relearning/Actuator Recalibration).