9-7X L6-4.2L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the ECT sensor.
Tighten the ECT sensor to 16 Nm (12 ft. lbs.).
3. Connect the ECT electrical connector (1).
4. Connect the negative battery terminal.
5. Refill the engine coolant. Refer to Cooling System Draining and Filling (LL8) (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Cooling System Draining and Filling)Cooling System Draining and Filling (LH6) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair/Cooling System Draining and Filling).