9-7X L6-4.2L (2008)
![background image](/saab/9-7x/l6-4.2l/Page-91005.png)
Notice: In order to prevent internal damage to the PCM, the ignition must be OFF when disconnecting or reconnecting the PCM connector.
6. Connect the I/P wiring harness electrical connector (1) to the PCM.
7. If a NEW PCM was installed, program the PCM. Refer to Control Module References (See: Testing and Inspection/Programming and
Relearning/Control Module References).
8. Using a scan tool, set the remaining engine oil life.