9-7X L6-4.2L (2008)
4. Insert the J 38125-561 tool into the 2 cavities on each side of the terminal at the front of the connector and push until you feel the tool disengage
the terminal retainers. See the release tool cross reference in the Reference Guide of theJ-38125 to ensure that the correct release tool is used.
5. Carefully pull the terminal out of the connector. Always remember never use force when pulling a terminal out of a connector. If the terminal is
difficult to remove, repeat the entire procedure.
Terminal Repair Procedure
Use the appropriate terminal and follow the instructions in theJ-38125.
Bosch Connectors (ECM)
Bosch Connectors (ECM)
Tools Required
J-38125 Terminal Repair Kit
Removal Procedure
1. Locate the assist lever on the top of the connector. Move the assist lever to the forward position.