9-7X L6-4.2L (2008)
1. Install the steering wheel to the steering wheel shaft.
Notice: Refer to Fastener Notice.
2. Install the retaining nut that secures the steering wheel to the steering wheel shaft.
Tighten the retaining nut to 41 Nm (30 ft. lbs.).
3. Connect the steering wheel electrical connector.
4. Install the horn plunger to the steering column.
5. Install the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement (See: Restraint Systems/Air Bag Systems/Air
Bag/Service and Repair/Removal and Replacement/Inflatable Restraint Steering Wheel Module Replacement).
6. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Steering Column/Air Bag(s) Arming and Disarming/Service and Repair).