9-7X L6-4.2L (2008)
6. Install the front propeller shaft. Refer to Front Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Front Propeller Shaft Replacement).
7. Inspect the transfer case fluid level. Refer to Transfer Case Fluid Replacement (See: Service and Repair/Removal and Replacement/NVG
120-NR9 - Transfer Case/Transfer Case Fluid Replacement).
8. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
Rear Output Shaft Seal Replacement
Rear Output Shaft Seal Replacement
Tools Required
*
J 37668-A Output Shaft Seal Installer (4401 & 4470 Transfer Case)
*
J 45380 Transfer Case Rear Bushing Remover and Installer
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the rear propeller shaft. Refer to Rear Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Rear Propeller Shaft Replacement).
3. Remove the rear output shaft seal.