9-7X L6-4.2L (2008)
10. Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
Tighten the control valve body bolts (in sequence) to 11 Nm (97 in. lbs.).
11. Ensure that the manual detent spring is aligned properly with the detent lever.
Tighten the manual detent spring bolt to 31 Nm (23 ft. lbs.).
12. Install the TCC solenoid with a new O-ring seal to the valve body.
13. Install the TCC solenoid bolts.
Tighten the TCC solenoid retaining bolts to 11 Nm (97 in. lbs.).