9-7X V8-5.3L (2005)
Automatic Volume Control: Service and Repair
Radio Volume Compensator Interior Noise Microphone Replacement
Removal Procedure
1. Remove the overhead console. Refer to Roof Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Roof Console Replacement).
2. Disconnect the microphone electrical connector (3).
3. Remove the 2 retaining screws to the microphone.
4. Remove the microphone (2) from the overhead console.
Installation Procedure
1. Install the microphone (2) to the overhead console.
Notice: Refer to Fastener Notice.
2. Install the 2 microphone retaining screws.
Tighten the screws to 0.8 Nm (7 in. lbs.).
3. Connect the microphone electrical connector (3).
4. Install the overhead console. Refer to Roof Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Roof Console Replacement).