9-7X V8-5.3L (2005)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Liftgate Applique Replacement
Liftgate Applique Replacement
Removal Procedure
1. Open the liftgate window.
2. Remove the screws that retain the liftgate applique.
3. Close the liftgate window.
Important: Do not open the liftgate with the liftgate glass open.
4. Close the liftgate window and open the liftgate.
5. Remove the liftgate applique from the liftgate pinch-weld flange.
Installation Procedure
1. Install the liftgate applique to the liftgate pinch-weld flange. Ensure that the liftgate applique is fully seated.
2. Close the liftgate and open the liftgate window.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the screws that retain the liftgate applique to the body.
Tighten the liftgate applique screws to 5 Nm (44 in. lbs.).
4. Close the liftgate window.