9-7X V8-5.3L (2005)
9. Install the seat belt bezel to the top of the seat back with the mounting screw.
Tighten the seat belt bezel screw to 3 Nm (26 in. lbs.).
10. Using a flat-bladed tool, carefully engage the plastic strips that retain the seat back cover to the side air bag inflator module.
11. Carefully install the seat back cover behind the trim edge of the side air bag inflator module.
12. Fasten the J-strips (1, 4) across the bottom of the seat back cover.
13. Install the seat cover flaps (2) to the seat frame with push-pins (3).
14. Install the seat trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion/Service and Repair/Seat Cushion Outer Trim
Panel Replacement).
15. Install the head restraint. Refer to Front Seat Head Restraint Replacement (See: Head Rest/Service and Repair/Front Seat Head Restraint
Replacement).
16. Install the front seat assembly from the vehicle. Refer to Front Seat Replacement - Bucket (See: Service and Repair/Front Seat Replacement -
Bucket).