9-7X V8-5.3L (2005)
Notice: Refer to Fastener Notice.
2. Install the ECT sensor.
Tighten the sensor to 20 Nm (15 ft. lbs.).
3. Connect the ECT sensor electrical connector (1).
4. Refill the engine coolant. Refer to Cooling System Draining and Filling (LL8) (See: Service and Repair/Cooling System Draining and Filling
)Cooling System Draining and Filling (LH6) (See: Service and Repair/Cooling System Draining and Filling).
