9-7X V8-5.3L (2005)
1. Locate the air flow direction arrow (2) on the MAF/IAT sensor.
2. Install the MAF/IAT sensor on to the air cleaner housing.
Notice: Refer to Fastener Notice.
3. Tighten the clamp securing the MAF/IAT sensor to the air cleaner housing.
Tighten the clamp to 7 Nm (62 in. lbs.).
4. Install the air cleaner outlet duct.
5. Install the air cleaner outlet duct bolt.
Tighten the bolt to 10 Nm (89 in. lbs.).
6. Tighten the clamps at the MAF/IAT sensor and the throttle body.
Tighten the clamps to 7 Nm (62 in. lbs.).