9-7X V8-5.3L (2005)
Stabilizer Link: Service and Repair
Front Suspension
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Remove any dirt or debris from the threads of the stabilizer link bolt.
4. Use the proper size wrench or socket to hold the stabilizer bolt while removing the stabilizer shaft nut (1).
5. Remove the washer (2) and the insulator (3) from the stabilizer shaft link bolt (9).
6. Remove the stabilizer shaft link bolt (9), washer (8) and the insulator (7).
7. Remove the insulators (4) (6), spacer (5).
Installation Procedure