9-7X V8-5.3L (2005)
Windshield Washer Switch: Service and Repair
Windshield Wiper and Washer Switch Replacement
Windshield Wiper and Washer Switch Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution).
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Covers Replacement).
3. Remove all wire harness straps.
4. Disconnect connectors, if necessary.
5. Depress the top and bottom clips on the windshield wiper and washer switch assembly.
6. Slide the windshield wiper and washer switch assembly away from the bracket to disengage.
Installation Procedure
1. Slide the windshield wiper and washer switch assembly into the bracket until the clips engage.
2. Route the wire harness assembly along the steering column jacket assembly.
3. Connect the windshield wiper and washer switch assembly connector, if necessary.