9-7X V8-6.0L (2008)
Notice: Refer to Fastener Notice.
3. Install the radio antenna cable assembly retaining screws.
Tighten the radio antenna cable assembly screws to 2.8 Nm (25 in. lbs.).
4. Close the hood.
5. Install the antenna mast. Refer to Fixed Antenna Mast Replacement (See: Antenna Mast/Service and Repair).
6. Reach up behind the wheelhouse panel and pass the end of the radio antenna cable assembly through the cowl opening (1).
7. Install the antenna cable grommet assembly to the cowl opening.
8. Install the wheelhouse panel. Refer to Wheelhouse Panel Replacement (Front End) (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair/Wheelhouse Panel Replacement (Front End))Wheelhouse Panel Replacement (Rear End) (See: Body and
Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Wheelhouse Panel Replacement (Rear End)).
9. Install the radio antenna cable (2) to the radio extension cable.
10. Close the I/P compartment.
